Hand dryer Dyson Airblade AB12 V White 1600W
The modern model of hand dryer Dyson Airblade AB01 is a combination of the three main advantages: speed, health and economy. Revolutionary technology It provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds. Action In the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm. Energy efficiency and environmental Its cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg. Indestructible case Attention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges. Proven and reliable Dyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities. Electro-technical parameters: Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell Color: silver Power supply: 230-240 V Frequency: 50 Hz Power Rating: 1600 W Motor speed: 88,000 rev / min. How to start: automatic - photocell Drying time: 10 sec Continuous running time: 30 seconds Air speed: 644 km / h Exhaust air: 37 l / s Noise level: 85 dB Protection: IPX5 Dimensions: height 642, width 303, depth 248 mm Package dimensions: height 740, width 365, depth 315 mm Weight: 14.5 kg Packaged Weight: 17.5 kg Warranty: 5 years. Installation height (measured from the floor): Men Women Children / Persons with disabilities To the upper edge equipment 1050 mm 975 mm 875 mm For screw fixing points 990 mm 915 mm 815 mm The bottom of the unit 408 mm 333 mm 233 mm Included with the dryer:
Hand dryer Dyson Airblade AB12 V Nickel 1600W
The modern model of hand dryer Dyson Airblade AB01 is a combination of the three main advantages: speed, health and economy Revolutionary technologyIt provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.ActionIn the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.Energy efficiency and environmentalIts cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.Indestructible caseAttention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.Proven and reliableDyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.Electro-technical parameters: Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell Color: silver Power supply: 230-240 V Frequency: 50 Hz Power Rating: 1600 W Motor speed: 88,000 rev / min. How to start: automatic - photocell Drying time: 10 sec Continuous running time: 30 seconds Air speed: 644 km / h Exhaust air: 37 l / s Noise level: 85 dB Protection: IPX5 Dimensions: height 642, width 303, depth 248 mm Package dimensions: height 740, width 365, depth 315 mm Weight: 14.5 kg Packaged Weight: 17.5 kg Warranty: 5 years. Installation height (measured from the floor): Men Women Children / Persons with disabilities To the upper edge 1050 mm 975 mm 875 mm For screw fixing points 990 mm 915 mm 815 mm The bottom of the equipment 408 mm 333 mm 233 mm With hand dryer:
Dyson Airblade 9kJ HEPA hand dryer
Najszybsza i najwydajniejsza suszarka z filtrem HEPA Dyson Airblade 9kj Wykonana ze szczotkowanej stali nierdzewnej Posiada dwa tryby pracy: Eco i Max Czas suszenia 10-12 sekund 5 lat gwarancji Filtr HEPA pochłaniający 99% zanieczyszczeń Curved Blade™ zapewnia prędkość powietrza 600km/h Działa z głośnością na poziomie 77db Moc urządzenia to 900W i 600W dla trybu Eco Ocena IP24 Silnik cyfrowy obracający się 75 000 razy na minutę Wydajność rzędu 23 litrów powietrza na sekundę Do 88% tańsza eksploatacja od innych suszarek Koszty niższe o 99% niż w przypadku ręczników papierowych Wymiary urządzenia Wysokość 500mm Szerokość 450mm Długość 100mm
Hand dryer Dyson Airblade AB09 Short
The modern model of hand dryer Dyson Airblade AB09 is a combination of the three main advantages: speed, health and economy Revolutionary technologyIt provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.ActionIn the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.Energy efficiency and environmentalIts cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.Indestructible caseAttention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.Proven and reliableDyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.Electro-technical parameters: Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell Color: silver Power supply: 230-240 V Frequency: 50 Hz Power Rating: 1600 W Motor speed: 88,000 rev / min. How to start: automatic - photocell Drying time: 10 sec Continuous running time: 30 seconds Air speed: 644 km / h Exhaust air: 37 l / s Noise level: 85 dB Protection: IPX5 Dimensions: height 642, width 303, depth 248 mm Package dimensions: height 740, width 365, depth 315 mm Weight: 14.5 kg Packaged Weight: 17.5 kg Warranty: 5 years. Installation height (measured from the floor): Men Women Children / Persons with disabilities To the upper edge 1050 mm 975 mm 875 mm For screw fixing points 990 mm 915 mm 815 mm The bottom of the equipment 408 mm 333 mm 233 mm With the hand dryer:
Hand dryer Dyson Airblade AB10 Tap Tall 1600W
The modern model of hand dryer Dyson Airblade AB10 is a combination of the three main advantages: speed, health and economy Revolutionary technologyIt provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.ActionIn the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.Energy efficiency and environmentalIts cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.Indestructible caseAttention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.Proven and reliableDyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.Electro-technical parameters: Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell Color: silver Power supply: 230-240 V Frequency: 50 Hz Power Rating: 1600 W Motor speed: 88,000 rev / min. How to start: automatic - photocell Drying time: 10 sec Continuous running time: 30 seconds Air speed: 644 km / h Exhaust air: 37 l / s Noise level: 85 dB Protection: IPX5 Dimensions: height 642, width 303, depth 248 mm Package dimensions: height 740, width 365, depth 315 mm Weight: 14.5 kg Packaged Weight: 17.5 kg Warranty: 5 years. Installation height (measured from the floor): Men Women Children / Persons with disabilities To the upper edge 1050 mm 975 mm 875 mm For screw fixing points 990 mm 915 mm 815 mm The bottom of the equipment 408 mm 333 mm 233 mm With the hand dryer:
Hand dryer Dyson Airblade AB11 Tap Wall 1600W
The modern model of hand dryer Dyson Airblade AB11 is a combination of the three main advantages: speed, health and economy Revolutionary technologyIt provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.ActionIn the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.Energy efficiency and environmentalIts cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.Indestructible caseAttention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.Proven and reliableDyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.Electro-technical parameters: Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell Color: silver Power supply: 230-240 V Frequency: 50 Hz Power Rating: 1600 W Motor speed: 88,000 rev / min. How to start: automatic - photocell Drying time: 10 sec Continuous running time: 30 seconds Air speed: 644 km / h Exhaust air: 37 l / s Noise level: 85 dB Protection: IPX5 Dimensions: height 642, width 303, depth 248 mm Package dimensions: height 740, width 365, depth 315 mm Weight: 14.5 kg Packaged Weight: 17.5 kg Warranty: 5 years. Installation height (measured from the floor): Men Women Children / Persons with disabilities To the upper edge 1050 mm 975 mm 875 mm For screw fixing points 990 mm 915 mm 815 mm The bottom of the device 408 mm 333 mm 233 mm With hair dryer:
