-
shipment: Wednesday (31 July)
-
-
-
Hand dryer Dyson Airblade AB09 Short
- Kod produktu: WD04
- Manufacturer: Dyson
- Availability: Product available.
-
Add feedback:
0 z 0 opinii
- Obserwuj produkt:
- €2,083.76 €1,694.11 net
-
Order now, we will send today!
Today's shipment is available for only:Place your order now, we will send your wares in:
Monday (29 July) at 2:00 PM Wednesday (31 July) at 2:00 PM 0 psc. in stock, shipping: Monday (29 July) at 2:00 PMdziśh min sec
The modern model of hand dryer Dyson Airblade AB09 is a combination of the three main advantages: speed, health and economy
Revolutionary technology
It provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.
Action
In the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.
Energy efficiency and environmental
Its cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.
Indestructible case
Attention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.
Proven and reliable
Dyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.
Electro-technical parameters:
- Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell
- Color: silver
- Power supply: 230-240 V
- Frequency: 50 Hz
- Power Rating: 1600 W
- Motor speed: 88,000 rev / min.
- How to start: automatic - photocell
- Drying time: 10 sec
- Continuous running time: 30 seconds
- Air speed: 644 km / h
- Exhaust air: 37 l / s
- Noise level: 85 dB
- Protection: IPX5
- Dimensions: height 642, width 303, depth 248 mm
- Package dimensions: height 740, width 365, depth 315 mm
- Weight: 14.5 kg
- Packaged Weight: 17.5 kg
- Warranty: 5 years.
Installation height (measured from the floor):
|
|
Men |
Women |
Children / Persons with disabilities |
|
To the upper edge |
1050 mm |
975 mm |
875 mm |
|
For screw fixing points |
990 mm |
915 mm |
815 mm |
|
The bottom of the equipment |
408 mm |
333 mm |
233 mm |
With the hand dryer:
Professional bathroom hand dryer with Dyson digital motor
The Dyson Airblade Tap dryer is equipped with a Dyson digital motor. Work on it took seven years. It is one of the smallest integrated engines in the world with a power of 1600W. The Dyson motor can suck in up to 30 liters of air per second. The engine is highly economical and durable, it generates digital pulses with a frequency of 6,000 units per second, which can reach a speed of 88,000 units per minute. There are only three moving parts inside the device, which limits the replacement of worn out elements, such as slip rings or carbon brushes.
Washing and drying hands in one place
Usually in public bathrooms, after washing their hands, the user must go to the dryer to dry their hands. Along the way, water dripping from your hands leaves streaks on the floor and creates a risk of slipping. With Dyson Airblade Tap, both activities are performed in one place. Hands are washed and dried under the tap.
Fast drying time: 12 seconds
Traditional hand drying methods take more time than using the Dyson Airblade Tap. Hand dryers are rarely located directly next to the sink, so the total drying time can be up to 43 seconds. This results in leaving the toilet with wet hands, which carry up to 1,000 times more bacteria than dry ones.
With the Dyson Airblade Tap hand dryer, you leave the sink with washed and dried hands, and drying takes only 12 seconds.
The most hygienic hand dryer
Most dryers are not equipped with air purification filters. They dry their hands with air taken from the bathroom, which contains bacteria and viruses. Dyson Airblade Tap is equipped with H13 HEPA filters that stop 99.9% of bacteria and viruses. Hands are dried with clean air. Moreover, the dryer casing is covered with an antibacterial coating.
Low operating costs
The running costs of the Dyson Airblade Tap hand dryer are up to 69% lower than other dryers and up to 97% lower than paper towels. This is due to the fact that other dryers take longer to dry hands and are equipped with heaters, which generates higher electricity consumption. Towels need to be constantly refilled and removed.
Low environmental impact
Dyson Airblade Tap dryers have a lower environmental impact in terms of CO2 emissions and impact on the ecosystem. Compared to other dryers, carbon dioxide emissions are less than 74%, and compared to paper towels, more than 70% less.
Easy to keep clean
The device is made of stainless steel and is easy to keep clean thanks to its smooth surface.
Space saving
A 2-in-1 dryer and faucet means one less device in the toilet. No need to install a paper towel dispenser or a traditional dryer saves space. It can be used, for example, for an additional toilet or to reduce the area of a public toilet.
Dyson Airblade Tap Touchless Hand Blower
Both the faucet and the Dyson Airblade Tap dryer are activated by sensors. You don't have to touch any taps or buttons. Additionally, the sensors emit light, which allows you to precisely adjust the position of your hand. The intelligent electronic system works without delays.
Water saving
The function of setting the water flow speed and operation using sensors allows you to save water and reduce costs.
Shortcuts:
Parameters
The modern model of hand dryer Dyson Airblade AB09 is a combination of the three main advantages: speed, health and economy
Revolutionary technology
It provides an effective method of drying hands. The precise effect is a result of connection of two advanced technologies and many years of construction. This leaves the hot air hand drying and evaporation instead developing method in which the central role filtered air flow with very high speed (644 km / h). As a result, water is simply pull out of hand, and the whole process takes just 10 seconds.
Action
In the process of air filtration can distinguish four main stages. First, the air passes through a special filter HEPA H12 (type Lifetime) enriched with anti-bacterial coatings. The merit of this is that the air used for drying is clean. Indeed filter removes 99.9%. Then the air gets into the engine, which transmits them through the device. There enters the insulated air ducts, whose role is to lower the noise level. At the end of the air stream is blown by a very narrow gap of 0.3 mm.
Energy efficiency and environmental
Its cause is largely a short time for drying hands using 80% less energy than would be the case with traditional dryers (4.44 kWh - Dyson Airblade, 22.36 kWh - dryers traditional), therefore operating costs falling to a minimum and reach the level of 0.0017 (PLN) per dry. Is also reduced carbon dioxide emissions, which annually reaches 88 kg.
Indestructible case
Attention is also drawn to the characteristic body hair, which is vandal-proof property, and all by design and deployed for building materials. Housing of die-cast aluminum is strong and durable. The same method gives the material a suitable elasticity, so they do not break or crack as a result of strong beats and flanges.
Proven and reliable
Dyson Airblade has undergone a number of fundamental biological research and held in the laboratory of Dyson, as well as external, independent and reputable organizations, leading universities.
Electro-technical parameters:
- Housing: die-cast aluminum is resistant to vandalism, anti-bacterial, painted outer shell
- Color: silver
- Power supply: 230-240 V
- Frequency: 50 Hz
- Power Rating: 1600 W
- Motor speed: 88,000 rev / min.
- How to start: automatic - photocell
- Drying time: 10 sec
- Continuous running time: 30 seconds
- Air speed: 644 km / h
- Exhaust air: 37 l / s
- Noise level: 85 dB
- Protection: IPX5
- Dimensions: height 642, width 303, depth 248 mm
- Package dimensions: height 740, width 365, depth 315 mm
- Weight: 14.5 kg
- Packaged Weight: 17.5 kg
- Warranty: 5 years.
Installation height (measured from the floor):
|
|
Men |
Women |
Children / Persons with disabilities |
|
To the upper edge |
1050 mm |
975 mm |
875 mm |
|
For screw fixing points |
990 mm |
915 mm |
815 mm |
|
The bottom of the equipment |
408 mm |
333 mm |
233 mm |
With the hand dryer:
Professional bathroom hand dryer with Dyson digital motor
The Dyson Airblade Tap dryer is equipped with a Dyson digital motor. Work on it took seven years. It is one of the smallest integrated engines in the world with a power of 1600W. The Dyson motor can suck in up to 30 liters of air per second. The engine is highly economical and durable, it generates digital pulses with a frequency of 6,000 units per second, which can reach a speed of 88,000 units per minute. There are only three moving parts inside the device, which limits the replacement of worn out elements, such as slip rings or carbon brushes.
Washing and drying hands in one place
Usually in public bathrooms, after washing their hands, the user must go to the dryer to dry their hands. Along the way, water dripping from your hands leaves streaks on the floor and creates a risk of slipping. With Dyson Airblade Tap, both activities are performed in one place. Hands are washed and dried under the tap.
Fast drying time: 12 seconds
Traditional hand drying methods take more time than using the Dyson Airblade Tap. Hand dryers are rarely located directly next to the sink, so the total drying time can be up to 43 seconds. This results in leaving the toilet with wet hands, which carry up to 1,000 times more bacteria than dry ones.
With the Dyson Airblade Tap hand dryer, you leave the sink with washed and dried hands, and drying takes only 12 seconds.
The most hygienic hand dryer
Most dryers are not equipped with air purification filters. They dry their hands with air taken from the bathroom, which contains bacteria and viruses. Dyson Airblade Tap is equipped with H13 HEPA filters that stop 99.9% of bacteria and viruses. Hands are dried with clean air. Moreover, the dryer casing is covered with an antibacterial coating.
Low operating costs
The running costs of the Dyson Airblade Tap hand dryer are up to 69% lower than other dryers and up to 97% lower than paper towels. This is due to the fact that other dryers take longer to dry hands and are equipped with heaters, which generates higher electricity consumption. Towels need to be constantly refilled and removed.
Low environmental impact
Dyson Airblade Tap dryers have a lower environmental impact in terms of CO2 emissions and impact on the ecosystem. Compared to other dryers, carbon dioxide emissions are less than 74%, and compared to paper towels, more than 70% less.
Easy to keep clean
The device is made of stainless steel and is easy to keep clean thanks to its smooth surface.
Space saving
A 2-in-1 dryer and faucet means one less device in the toilet. No need to install a paper towel dispenser or a traditional dryer saves space. It can be used, for example, for an additional toilet or to reduce the area of a public toilet.
Dyson Airblade Tap Touchless Hand Blower
Both the faucet and the Dyson Airblade Tap dryer are activated by sensors. You don't have to touch any taps or buttons. Additionally, the sensors emit light, which allows you to precisely adjust the position of your hand. The intelligent electronic system works without delays.
Water saving
The function of setting the water flow speed and operation using sensors allows you to save water and reduce costs.
| Read | Description | Download |
|---|---|---|
 Product card (printable) |